You are here: Home > News > Content

Contact Us

Add: No.15, Sanmin RD, Cicheng, Ningbo, Zhejiang, China

Tel: +86-574-87593761

Fax: +86-574-87593761

E-mail: leochinese@aliyun.com

Timing Belt Pulley Anti-aging Replacement Of New Belt In A Timely Manner
Jun 13, 2017

In the car engine between 60,000 to 90,000 km, we should check the Timing Belt Pulley wear situation, but also pay attention to check the work of the engine Timing Belt Pulley media. If there is an abnormality should be replaced, even if the Timing Belt Pulley wear is not serious, replace the engine Timing Belt Pulley.

There are several Timing Belt Pulleys in the front of the engine, each Timing Belt Pulley is playing an important role. In the engine, through the Timing Belt Pulley drive a variety of auxiliary machine operation, such as air conditioner compressor, power steering pump, alternator and so on. If the Timing Belt Pulley is broken, or there is a slip, will cause the auxiliary auxiliary function loss, or to reduce its performance, thus affecting the normal use of the car. Therefore, the daily inspection of the Timing Belt Pulley is very important.

The Timing Belt Pulley inspection mainly includes two aspects: Timing Belt Pulley tension and Timing Belt Pulley wear.

First check the tension of the Timing Belt Pulley, then you can use the thumb, strong press the middle of the Timing Belt Pulley pulley. Press the pressure of about 10kg or so, if the Timing Belt Pulley pressure in the 10mm or so, that the Timing Belt Pulley tension to play appropriate. If the reduction is too large, the tension of the Timing Belt Pulley is considered insufficient. If the Timing Belt Pulley is hardly pressed down, the tension of the Timing Belt Pulley is considered to be too large. When the tension is insufficient, the Timing Belt Pulley is prone to slip. Tension is too large, it is easy to damage a variety of auxiliary bearings. For this reason, the relevant adjustment nut or bolt should be loosened and the tension of the Timing Belt Pulley should be adjusted to the best condition.

In addition, we must pay attention to the wear of the Timing Belt Pulley. The old Timing Belt Pulley wears serious, so that the contact area of the Timing Belt Pulley and pulley drops sharply. At this time as long as the force of a pressure Timing Belt Pulley, the Timing Belt Pulley deep sink to the pulley groove. Timing Belt Pulley rubber also has an aging problem, if the Timing Belt Pulley rubber serious aging, must be replaced in time for the new Timing Belt Pulley.